Getting Started; Utilization For The Purpose Intended; First Steps; Unpacking And Inspection - Studer D950 Operating Instructions Manual

2

GETTING STARTED

2.1

Utilization for the Purpose Intended

2.2

First Steps

2.2.1

Unpacking and Inspection

2.2.2

Installation

Power connection:
Ventilation:
Date printed: 03.09.03
The D950 Digital Mixing System is intended for professional use.
It is presumed that the unit is operated only by trained personnel. Servic-
ing is reserved to skilled technicians.
The electrical connections may be connected only to the voltages and sig-
nals designed in this manual and on the units.
Your new mixing system is shipped in a special packing which protects the
unit against mechanical shock during transit. Care should be exercised
when unpacking so that its surfaces do not get marred.
Verify that the content of the packing agrees with the items listed on the
enclosed shipping list.
Check the condition of the equipment for signs of shipping damage. If
there should be any complaints you should immediately notify the for-
warding agent and your nearest Studer distributor.
Please retain the original packing material because it offers the best pro-
tection in case your equipment ever needs to be transported.
The attached female IEC 320/C 13 mains cable socket has to be connected
to an appropriate mains cable by a trained technician with respect to your
local regulations. Refer to the "Installation, Operation, and Waste Dis-
posal" section at the beginning of this manual.
Maintenance work inside the unit must be performed by a trained techni-
cian.
Humidity: Do not use the unit near any source of moisture or in excessively humid
environments.
When installing the unit in a rack or any other location, be sure that there
is adequate ventilation. The unit should be situated so that its location or
position does not interfere with its proper ventilation.
The ambient temperature of the D950 must not exceed 35 °C, otherwise
the longevity might be drastically reduced.
SW V3.3
D950 Digital Mixing System
Getting started 2-3