Protection Sets; Creating Protection Sets - Studer D950 Operating Instructions Manual

5.13.1

Protection Sets

Protection Sets:
5.13.1.1

Creating Protection Sets

Date printed: 27.08.03
Any combination of controls on any combination of channels may be or-
ganized into "Protection Sets." These may be created, saved, and recalled
as needed. Any number of Protection Sets may be created and stored. Pro-
tection Sets are available to any Mix Pass within the Title.
To create a Protection set, execute the following procedure:
1. Click the Mix Protection Enabled button to open the "Automation
Protection" window. The first time it is opened no Protection Sets will
be available and the various fields will be blank.
2. Click the Edit... button. The "Object Picker for Select Objects to be
Removed From Automation Scope" will open. Using this "picker,"
controls may be selected for Protection. For example, Mutes on chan-
nels 1...12 may be selected as a Protection Set. Refer to
5.16.2.1 for information regarding the operation of the Object Picker.
SW V3.3
D950/Vista7 Digital Mixing System
AutoTouch+ 5-105
chapter