Touch And Hold - Studer D950 Operating Instructions Manual

D950/Vista7 Digital Mixing System
5.7

Touch and Hold

D950:
5-62 AutoTouch+
Touch and Hold functions are key aspects of understanding the Auto-
Touch+ system. Knowledge of these functions and their permutations is
essential to the operation of the system. As with Control Modes, there are
rules, conditions, and options that determine the precise function of these
features.
Faders and Encoders on the channel strip and the (D950) CAS are touch-
sensitive. Switches are touch-sensitive in regard that touch events are rec-
ognized by the system when a Switch is actuated.
Note: This chapter will emphasize how touch events relate to Faders and
Encoders. Switch automation information will be included, but for com-
plete information regarding Switch automation refer to
The activator keys for Touch and Hold functions are found in the TOUCH /
HELD section of the AutoTouch+ Panel.
SW V3.3
Vista:
chapter 5.10.
Date printed: 27.08.03