Tools: Machine Control Window - Studer D950 Operating Instructions Manual

D950/Vista Digital Mixing System
4.5.2.1

Tools: Machine Control Window

Transport Controls
Timecode for LOC, Goto/Loop Start
or DROP-IN
Locator Key
Loop Mode Setting
Timecode for Loop End or Drop Out
4-76 GC Operation
The Machine Control window can only be displayed if the TC2 or TC3
timecode options are installed.
Click on this icon to open the machine control window.
The Machine Control window allows simple machine control functions to
be operated from the GC screen. The basic machine control functions are
also available from the Control Surface panel (except for Vista 6).
The Machine Control window is always positioned on the top level of
display of the windows of the GC. Much of the window's operation is de-
pending on the settings of the Options/TC-Reader/Generator menu. Refer
to chapter 4.5.2.1.1 for details.
SW V3.3
TC Reported from
9-Pin Machine
Click here for Cue List
Selection Menu
Goto Key
Loop Key
Click here for Cue List
Selection Menu
Date printed: 05.08.03