Control Group Assignment - Studer D950 Operating Instructions Manual

D950/Vista Digital Mixing System
4.7.7.2

Control Group Assignment

4-130 GC Operation
A Control Group Assignment dialog window can be started from the Sys-
Admin (System Administration) menu in the Graphic Controller. This
window allows to view the members for a selected Control Group and to
edit the members by clicking or dragging them graphically on the screen.
Selection of the control group to be edited is not synchronized with the
Desk selection – so two different control groups can be viewed at a time.
The Control Group Assignment window serves a similar function as the
CTRL GROUP SETUP / EDIT key on the control surface, except assignments
are made via software, and the Control Group Filter window does not
open.
To assign a channel to a Control Group, select a Control Group Master
using the pop-up menu in the field at the top of the window. Channels can
be assigned or de-assigned by double-clicking the channel's name. Keep in
mind that a channel can belong to only one Control Group at a time. If as-
signed, a yellow N will appear in the box to the left of the channel name,
and the number of the Control Group will be displayed in the channel's
fader. Control Group Assignments are stored within Snapshots and Pre-
sets.
SW V3.3 Date printed: 05.08.03