Start From Scratch - Studer D950 Operating Instructions Manual

D950/Vista Digital Mixing System
7.3.1.2

Start from Scratch

7-14 ConfigTool
It is sometimes handy to find out how many DSP boards would be needed
for a certain configuration. You can always configure the mixing console
of any description by starting with an empty (New)
you will use the File/New menu. The approach of starting from scratch
will be useful if you do not have to modify an existing console, but are
really starting a new project.
The first thing you need to do is selecting the sample frequency. The de-
fault value is 48 kHz. The buttons on the toolbar show the selected value.
F Tip If you want the new configuration to really run on your existing console,
you need to be careful to think of all the elements of a configuration –
channel numbers and types, summing buses, I/O configuration, shared
functions, etc. Otherwise your new configuration may not be able to be
loaded properly on an existing console.
SW V3.3
file. For this,
*.vmc
Date printed: 05.08.03