D950/Vista7 Digital Mixing System
Encoder Null Indicators:
For the last encoder touched, left and right arrow lights indicate the differ-
ence between the current encoder value and the Active Pass Read Mix
data. When the values match both lights are extinguished. An exception is
to show the offset from the Trim Null point when in TRIM (this is always
the absolute position of the encoder from 0 dB). The encoder null indica-
tors are located at the top of the CAS, just below the Function Value dis-
play.
Encoder Value:
The current value of the last CAS control used is shown in the Function
Value display at the top of the CAS.
AutoTouch+ 5-173
Date printed: 27.08.03
SW V3.3