Studer D950 Operating Instructions Manual page 50

D950 Digital Mixing System
2-20 Getting started
then the SEL keys of two channel strips you want to be swapped – it's
done. The CH SWAP can be used, for example, to temporarily re-locate
the controls for a Kick Drum routed through Channel #1 nearer to the
center into the sweet spot to work on it for a while. When finished, press-
ing the appropriate BANK key once again puts the Desk assignment back
to its original layout from the Strip Setup page. Multiple Swaps are also
possible. Swapped assignment is a temporary measure; it will be set back
to default by hitting a Bank key, or at console shutdown.
SW V3.3 Date printed: 03.09.03