Studer D950 Operating Instructions Manual page 127

PAGE 3 (CLVL):
LOOK FORWARD:
PAGE 4 (KEY)
KEY SOURCE:
Date printed: 03.09.03
AUTO: The SW key within the first LACP section switches the program-sensitive
Auto Make-up Gain function ON or OFF.
A special function of the Dynamics Section, the Look Forward function
allows a variable delay for anticipating sudden changes in audio levels,
thus helping the Dynamics Section to fully process fast events. Delay is
adjustable within a range from 0 to 25 ms in discrete steps (0 ms, 0.2 ms,
0.3 ms, 0.5 ms, 1 ms, 2 ms, 3 ms, 5 ms, 10 ms, 20 ms, 25 ms). This allows
the Dynamic unit to act upon the entire transient portion of the input sig-
nal, if desired.
Note: The Look Forward function is shared by all dynamic unit processes.
GAIN: For manual gain compensation; gain values from 0 through +24 dB can be
added in 1 dB steps.
HPF/LPF: High-pass and low-pass filters are available within the side-chain key sig-
nal. This facilitates frequency-dependent dynamic processing for creating
effects such as de-essing. Both filters can be switched ON/OFF independ-
ently and feature cut-off frequencies that are continuously adjustable be-
tween 20 Hz and 20 kHz.
The Key Source input can be selected from CHAN (dynamics processing
depends on the channel's input signal) or PTCH (processing is controlled
by a signal connected via the patch).
SCL: Activates the Side-Chain Link function, if it is available for the specified
channel.
Note: All PAGE 4 functions (HPF/LPF, Key Source, and Side-Chain Link) are
shared by all dynamic unit processes.
SW V3.3
D950 Digital Mixing System
Desk Operation 3-51