Multi-Format Ex Panning Parameters On The Lacp - Studer D950 Operating Instructions Manual

3.3.13.8

Multi-format EX Panning Parameters on the LACP

Example: Multi-Format EX Panning, Page 1
Mono EX panning control parameters
CENT
sLCR BALANCE
F/S PANNING
(FRONT/SURROUND)
EX PANNING
Date printed: 03.09.03
1
SW
CENT
AUTO
2
SW
sLCR
AUTO
3
SW
F/S
AUTO
4
SW
EX
AUTO
MPAN
n–1
1 2 TALK
3 4 LAST MODE
PAGE
FREEZE
SW V3.3
D950 Digital Mixing System
Available operating elements and their function
SW key = CENT function ON/OFF
Rotary encoder = 0 to 100% setting (0% = phantom center)
LED bar =
Center LED
= no function
Display
= CENT; label of control parameter
0%; Phantom center
100%; Center fully active
= sLCR balance function ON/OFF
SW key
Rotary encoder = sLCR balance setting
LED bar =
Center LED
= ON if sLCR balance in center position
Display
= sLCR; label of control parameter
L30_; fully left
L00R; center
_30R; fully right
SW key = F/S panning function ON/OFF
Rotary encoder = F/S panning
LED bar =
Center LED
= ON if F/S panning in middle position
Display
= F/S_; label of control parameter
_F30; fully front
__C_ ; center (middle) between front and back
_B30; fully back
SW key = EX panning function ON/OFF
Rotary encoder = EX panning setting
LED bar =
Center LED
= ON if EX panning in center position
Display
EX ; label of control parameter
=
L30_; fully left
__C_ ; center
_30R; fully right
Display = Indication of panning selection (Page 1)
FEED indication (Page 2)
MODE indication (Page 3)
(Page 4 not used)
Phantom center
Center fully active
fully left
center
fully right
fully front
middle betw. front & back
fully back (surround)
fully left
center
fully right
Desk Operation 3-99