Transfer The Files To The Console - Studer D950 Operating Instructions Manual

D950/Vista Digital Mixing System
7.3.4

Transfer the Files to the Console

On the Studer D950/Vista System
On a Separate PC
7-22 ConfigTool
F Tip Please note that if you now display the core View, the lettering "(rough
estimation)" will be missing, indicating that the numbers displayed are
now the real, load-balanced ones.
The displayed warning does not mean that the configuration will not work.
The meaning of the warning will be explained in
The Core file and the "meta" VMC files are now ready to be used on a
D950 or Vista console.
If you are running the Session Configuration Tool on the D950/Vista PC
and the search paths are set as described before, there is nothing more you
need to do in order to load a configuration. Simply switch to the
D950/Vista operating system (i.e., the GC) and load a new configuration
from the GC File menu.
If you are running the Session Configuration Tool on a separate PC, you
will need to transfer the configuration files to the Studer D950/Vista con-
trol PC. Since all files are Windows files, it is a simple matter of using a
transfer medium (floppy, ZIP or even a LAN network) to transport the
files. Care has to be taken to store the files under the appropriate directory
on the Studer D950/Vista control PC as described above. The only files
that must be transferred for each configuration in the above example are:
•
MyConfig.vmc
•
MyConfig.cor
Both files must be in the same subdirectory, otherwise the Studer
D950/Vista will not be able to load this configuration. The best practice is
to always copy the whole folder
paste it to the
SW V3.3
<MyConfig>
directory.
C:\D950SYSTEMDB
chapter 7.5.3.1.
containing both files and
Date printed: 05.08.03