Studer D950 Operating Instructions Manual page 378

D950/Vista7 Digital Mixing System
Conditions:
5-48 AutoTouch+
Trims) is played back. Any changes made to the Trim value (+/- from
the nominal Trim value), will offset the Read Mix values by that
amount.
On the D950 desk, read Mix data will be heard; no be indication by the
control's position.
On the Vista desk, the Read Mix (replay value) is roughly indicated by a
pink-colored element.
- If the control is moved while in TRIM ENABLE (no Touch modes
engaged), the Trim value will be AUDITIONED. The Trim values
will offset the Read Mix Data and the net result will be heard. In
other words, if the control is moved, the audio reflects the sum of
the Read Mix Data plus the offset from the nominal Trim value of
the control. So, if the Read Mix Data had a moving value, you will
hear that same moving value, except it will be offset by the amount
that the control has been moved from the nominal trim value.
- If changes to Trim values have been previously written, faders in
TRIM will normally replay the Read Mix Data (which incorporates
the previous Trim values) and the Trim Replay values will be
shown on the faders and null indicators. Other controls will replay
the Read Mix Data (which incorporates the previous Trim values).
Changes to Trim values will be displayed by the control.
Record On:
• TRIM RECORD: Everything is the same as with Record Off, except
that the Trim values are written into a new Mix Pass. For all controls,
the Trim offset is combined with the Read Mix data in the new pass.
The Trim Replay data is also modified for faders.
- Previous Trim values are updated (modifying a trim).
- At the end of a pass in which at least one control was in TRIM
RECORD, a new Mix Pass is generated that contains the previous
Mix Pass Read data plus the Trim offset. For faders, the newly re-
corded Trim Replay Data is generated as well.
Note: TRIM RECORD is a destructive mode in regard that previously written
Trim data is updated. However, Trim data is never lost because a new Mix
Pass is created at the end of every Trim RECORD pass. All Mix Passes are
retained in the Mix Tree unless purposely deleted.
• If touched and not in RECORD, the control will enter TRIM
AUDITION for the duration of the touch. The control will snap back to
its Trim value upon release.
• With TOUCH RECORD engaged, the control will enter TRIM
RECORD (Punch-in) when touched and return to TRIM ENABLE (Re-
play) when released (Punch-out). When released the control will snap
back to its Trim value unless GLIDE is engaged. If glide is engaged the
control will glide back to its Trim value.
• With TOUCH HOLD engaged, the control will enter TRIM
AUDITION mode when touched and holds the audition value when re-
leased.
• With TOUCH RECORD and TOUCH HOLD engaged, the control will
enter TRIM RECORD (Punch-in) when touched and stays in TRIM
RECORD when released. The control will stay in TRIM RECORD un-
til punched out or the Mix Pass has ended.
SW V3.3 Date printed: 27.08.03