Studer D950 Operating Instructions Manual page 561

; [MPU_0]
; MasterAddr=
;
;
;
;
; HDLCAddr=
; ApplicationFilename= location and name of Application to download (j9504902.pgm)
[MPU_0]
MasterAddr=1
HDLCAddr=244
ApplicationFilename=C:\D950SYSTEM\j9504902.pgm
; [CAS_0]
; MasterAddr=
;
;
;
;
; HDLCAddr=
;
; DeskLocation=
;
;
; ApplicationFilename= location and name of Firmware Application to download for update
;
;
;
[CAS_0]
MasterAddr=0
HDLCAddr=128
DeskLocation=Left
ApplicationFilename=C:\D950SYSTEM\cas010320.s19
; [BLOCKED_KEYS]
;
; NumberOfBlocked4ChStripKeys=2 number of blocked keys on each strip
;
; Blocked4ChStripKey0=3
; Blocked4ChStripKey1=10
;
; NumberOfBlockedCauKeys=
; BlockedCauKey0=
; ...............
; NumberOfBlockedAcuKeys=
; BlockedAcuKey0=
; ...............
; NumberOfBlockedAmpKeys=
; BlockedAmpKey0=
; ...............
; NumberOfBlockedCsuKeys=
; BlockedCsuKey0=
;
;
;
;
; ...............
; NumberOfBlockedMpuKeys=
;
; BlockedMpuKey0=
; ...............
; NumberOfBlockedCasKeys=
;
; BlockedCasKey0=
Date printed: 05.12.03
first Multiformat Panning Unit with logical Node No. (starting with 0)
connected to HDLC Master x (1..NumberOfHDLCMaster)
HDLC master address 1 = IP module B
HDLC master address 2 = IP module C
HDLC master address 3 = IP module D
corresponds to Mpu HDLC address (starting with 244)
first Central Assign Section Unit with logical Node No. (starting with 0)
connected to HDLC Master x (1..NumberOfHDLCMaster)
HDLC master address 1 = IP module B
HDLC master address 2 = IP module C
HDLC master address 3 = IP module D
corresponds to Cas HDLC address
starting with 128 and multiple of 16 (eg. 128 or 144 etc.)
corresponds to the physical location on the Desk (Left/Right dft:Left)
Note: If more than 1 CAS declared with no desk location description,
the multiple CAS work in parallel over the entire desk
Note: cas010320.s19 is mandatory if you update to D950 Rel V2.5
The Application file is not mandatory for normal operation,
it is only used for firmware updates on the CAS module.
Blocked (inaktive) key definition section
(for key numbering see KeyNumber.xls)
on every 4ChStripNode
inactive key number 0..51 ( 3 == Channel ON key)
inactive key number 0..51 (10 == Clipbpard CLR key)
number of blocked keys on Central Assign Unit (CAU)
inactive key number 0..79
number of blocked keys in old Automation Control Unit (ACU) V2.5
inactive key number 0..23
number of blocked keys in new Automation Master Panel (AMP) V3.0
inactive key number 0..51
number of blocked keys in Central Select Unit (MMS/BSU/CFU)
inactive key number 0..19 -> MMS;
Note: same keys on 2nd MMS/BSU/CFU are inactive,
if 2nd MMS/BSU/CFU is installed
number of blocked keys on each half
on every MpuNode (Joystick)
inactive key number 0..12
number of blocked keys on every CasNode
(Central Assign Section)
inactive key number 0..182
SW V3.3
HDLC master address 0 = IP module A
HDLC master address 0 = IP module A
20..39 -> BSU;
40..59 -> CFU;
D950 Digital Mixing System
System Administration 6-31