Active Pass; Mix Tree Display Modes - Studer D950 Operating Instructions Manual

5.4.1.2

Active Pass

5.4.1.3

Mix Tree Display Modes

Hide Tree/Show Tree Button:
Date printed: 27.08.03
The Active Mix Pass provides the Read Mix data for subsequent RECORD
Mix Passes.
When a Mix Pass becomes Active the following events occur:
• In the AutoTouch+ window:
- The name and assigned number of the Mix Pass appears in the
"Pass:" field
- The name of the Mix Tree appears in the "Mix:" field
- Any notes belonging to the pass appears in the "Notes:" field
- The Green Light illuminates above the associated position in the
Mix Pass Stack
• In the Mix Tree window:
- The Mix Pass is highlighted in green
The Active Mix is normally the mix on the top of the stack. Refer to
chapter 5.5.1 for details regarding the Mix Pass Stack.
AutoTouch+ may be operated with or without the Mix Tree displayed. The
Mix Pass Stack will be available in either case and can be used without the
Mix Tree if desired (as in V2.5). To facilitate working without the Mix
Tree, it may be hidden so that all Mix management can be done within the
Mix Pass Stack. The Mix Tree is hidden by clicking the Hide Tree button
in the AutoTouch+ window.
The Mix Tree will disappear as indicated below and the Hide Tree button
changes to Show Tree. At any time, the Mix Tree may be made fully visi-
ble again by clicking the Show Tree button.
SW V3.3
D950/Vista7 Digital Mixing System
AutoTouch+ 5-29