Update Snap Source Mix - Studer D950 Operating Instructions Manual

D950/Vista7 Digital Mixing System
Mix Selection Menu:
Timecode Entry Fields:
Offset Controls:
5.16.3.4

Update Snap Source Mix

5-140 AutoTouch+
This pop-up menu box provides a list of mixes available to become the
Merge Mix. This list contains the same mixes that are available to the Ac-
tive Mix and functions using the same selection techniques.
Note: The Merge Mix may be the same mix as the Active Mix.
For a Merge edit to be performed, a Data Region from within the Merge
Mix must be selected.
The Data Region is defined using Timecode Entry Fields. The Merge Mix
has the following Timecode Entry Fields:
In Time: This is the starting point of the Data Region from the Merge Mix;
Out Time: This is the ending point of the Data Region from the Merge Mix.
The Merge Mix timecode entries are selected using the same techniques as
used for selecting the Active Mix timecode addresses.
Notes: The Data Region from the Merge Mix is applied to the Edit Region of the
Active Mix. Therefore, the Data Region and Edit Regions must be the
same length. Because of this, the Length field in the Active Mix box works
in concert with the In Time or Out Time in both the Active and Merge Mix
boxes. Changing the Length field will change the values in the Active Mix
and Merge Mix boxes. Changing the Merge Mix In Time or Out Time will
change the Active Mix In Time or Out Time values, as well as the Length
value. Locking the Length field will affect the functions of the In Time or
Out Time in both the Active Mix and Merge Mix sections.
Refer to chapter 5.16.4
An Offset combo box is provided to facilitate easy control of offsets be-
tween the Active Mix and Merge Mix In Times.
The Merge Mix Offset controls function the same as the Spread Source
Mix Offset controls.
The Update Snap Source Mix allows external mix data from a single point
In Time (Data Point) to be applied to the Active Mix. The data from the
selected point in an external mix (Spread Source Mix) is applied to the
selected objects, on the selected channels, in the entire Active Mix. It per-
forms the same basic function as "Update Mix Snapshot" from the D950
System Mix Options menu.
The Update Snap Source Mix combo box has two primary control sets:
• Mix Selection Menu: used to select the Update Snap Source Mix;
• Timecode Entry Field: used to select the Data Point from Update Snap
Source Mix.
SW V3.3
for additional details regarding timecode entries.
Date printed: 27.08.03