The Option Menu; Option: Meter/Generator - Studer D950 Operating Instructions Manual

D950/Vista Digital Mixing System
4.6.5

The Option Menu

4.6.5.1

Option: Meter/Generator

Metering/Meter Position:
4-94 GC Operation
The Option Menu is used to set up various operating modes, preferences,
and options. It consists of several items, some of which may not be avail-
able if the appropriate D950/Vista option is not installed. Items in the up-
per part will generally bring up a screen for selection of settings and oper-
ating modes; the lower part contains two items that can be directly checked
from the menu.
D950:
Vista only
The Meter/Generator page is used for adjusting various settings of the desk
channel strip metering and test generator. Generator defaults are automati-
cally stored in the
D950system\shutdown.pfc
tem, so that the last used defaults are available after the next start of your
system.
This action globally sets the metering signal source for all the channels of
the same type to the same point within the signal path. It is usual to set the
Input Channel and Monitor Channel meter sources to Input and those of
the Group, AUX and Master Channels to the Post-Fader position. Meter
positions can be changed on a channel-by-channel basis and stored with
Snapshots and Presets.
SW V3.3
Vista:
file when quitting the sys-
Date printed: 05.08.03