Auto Mode Key Function - Studer D950 Operating Instructions Manual

5.7.6

Auto Mode Key Function

Auto Mode Key:
Auto Mode Key Function:
Using the Auto Mode Key:
Date printed: 27.08.03
The channel strip AUTO / AUTO MODE key is also known as the "modifier
key."
D950:
Holding the AUTO / AUTO MODE key down temporarily reverses the state
of the Master Panel Touch Record key on a local basis. For example, if
Touch Record is activated on the AutoTouch+ Panel, holding down the
AUTO / AUTO MODE key will deactivate Touch Record on that channel as
long as the key held down. If Touch Record is not active, holding the
AUTO / AUTO MODE key will activate it for that channel.
The AUTO / AUTO MODE key may be used as follows:
• Global Touch Record Active:
Holding the AUTO / AUTO MODE key will deactivate Touch Record
-
for that channel. This will allow enabled controls to be auditioned
on a local basis without being punched-in.
- Touching an enabled control will punch it in and holding it will
keep it in RECORD. Pressing and holding the AUTO / AUTO MODE
key before the control is released will deactivate Touch Record.
When it is released, the control will not punch-out and will stay in
RECORD in a Held state.
• Global Touch Record Inactive:
Holding the AUTO / AUTO MODE key will activate Touch Record for
-
that channel. This will allow enabled controls to be punched-in on a
local basis.
Holding the AUTO / AUTO MODE key and releasing a control that is
-
in RECORD will punch that control out. In this case, the control
may be touched at any time, but the AUTO / AUTO MODE key must
be pressed at the time of release for a punch-out to occur.
SW V3.3
D950/Vista7 Digital Mixing System
Vista:
AutoTouch+ 5-69