Studer D950 Operating Instructions Manual page 572

D950/Vista Digital Mixing System
Test the Installation:
7-6 ConfigTool
• Temp Files Path, and
• Config Path,
for which the appropriate paths must be entered manually; they must be
followed by a backslash (\) sign.
After making the appropriate entries please click "OK" to finish the prepa-
rations and to store the edited "
learn more about the use of the .ini file, please refer to
tenance.
Now that you have installed all files and set the basic options, you can
proceed to test the whole installation, by generating an empty configura-
tion. This empty configuration is loaded per default after starting the ap-
plication.
Select the menu item "Generate" and then "All". This will start the process
of generating the DSP and control software that is needed to run a new
Session Configuration on your console. Various messages will be dis-
played, and after a while, a message similar to the following one should
appear:
After the message "Build All finished successfully !!" appears, click on
"OK" to finish the successful installation and test procedure.
SW V3.3
" file automatically. To
D950CfgTool.ini
chapter 7.5, Main-
Date printed: 05.08.03