6.1.3 D950System - Studer D950 Operating Instructions Manual

6.1.3 D950System

D950System
USERS
MyClipboardLib
MyClipboard1.cpy
MyClipboard2.cpy
John
MyOptions1.mop
MyOptions2.mop
Martin
MyOptions1.mop
MyOptions2.mop
d19devicesTemplate.ini
d19devices.ini
D950OflaResources.ini
D950Ofla.mop
D950MonResources.ini
MonAnyname1.ini
shutdown.pfc
shutdown.mon
shutdown.tst
d950system.log
staticautomation.ini
Date printed: 05.12.03
USERS:
MyClipboardLib:
MyClipboard1.cpy:
John:
MyOptions1.mop:
d19devicesTemplate.ini:
d19devices.ini:
D950OflaResources.ini:
D950Ofla.mop:
D950MonResources.ini:
MonAnyname1.ini:
shutdown.pfc:
shutdown.mon:
shutdown.tst:
d950system.log:
staticautomation.ini:
SW V3.3
Contains various subdirectories. Each directory represents one
user, this user's option files, and possibly his individual clip-
board libraries.
Contains multiple sets of clipboard settings for copying to
channels. This directory may also be located within the direc-
tory of an individual user, depending on where the operator de-
cided to save the library.
Clipboard file containing clipboard data. The following data or
combinations of data may be contained within one file: EQ, fil-
ters, dynamics, pan, delay, or even a complete channel.
Contains various mix option files; can also contain clipboard li-
braries.
Mix option file; containing a set of mix options.
Template file for the
D19devices.ini
Contains definitions of Studer microphone preamplifiers con-
nected to a specific installation.
No user access!
Contains current mix options. If this file is deleted, the factory
default options will automatically be applied!
No user access!
Monitoring file defining the CR monitoring format, studio A/B,
digital insert, software pop-up extension for source selectors, as
well as the definition of the source selectors and their sources.
Dim level is also specified in this file. There can be various ver-
sions of this file. Each title remembers which file was loaded
when it was closed the last time.
Contains the last preference settings, such as windows or tool-
bar positions, etc. This file also contains the names of interface
subclasses. Included are also:
• TC offsets and reader settings
• "Auto Select" setting of General Patch targets
• Device label option settings, and
• Setting of GC multidesk groups, if present.
This file may exist multiple times with user names and a
extension. Since
Shutdown.pfc
plication is quit, it is recommended to keep one version with
user preferences under a different name.
Stores the last monitoring settings when the application soft-
ware is quit.
Stores the last time code-related settings when the application
software is quit.
Stores a log file with various information used for Studer serv-
ice & support only.
Stores global static automation options, including:
• Crossfade switch position (at the beginning of, during, or
after a crossfade)
• Default snapshot mask
• Trim mode active.
D950 Digital Mixing System
file
is overwritten each time the ap-
System Administration 6-5
*.pfc