Setting Igmp Snooping Status Per Interface - Huawei Quidway S1700 Series Web User Manual

Quidway S1700 Series Ethernet Switches
Web User Manual
----End
Table 12-3 Parameters of Configuring Interface assigned to a Multicast Service
Title
VLAN
Interface
Port or Trunk
Multicast IP

12.1.4 Setting IGMP Snooping Status per Interface

Use the Multicast > IGMP Snooping > Interface (Configure) page to configure IGMP
snooping attributes for a VLAN interface.
To configure IGMP snooping on a VLAN:
1. Click Multicast, IGMP Snooping, Interface.
2. Select Configure from the Action list.
3. Select the VLAN to configure and update the required parameters.
4. Click Apply.
Figure 12-8 Configuring IGMP Snooping on an Interface
----End
To show the interface settings for IGMP snooping:
1. Click Multicast, IGMP Snooping, Interface.
Issue 01 (2011-11-17)
Description
Specifies the VLAN which is to propagate the multicast service.
(Range: 1-4093)
Activates the Port or Trunk scroll down list.
Specifies the interface assigned to a multicast group.
The IP address for a specific multicast service.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
12 Multicast Configuration
115