Display Ip Interface Vlan-Interface - Huawei Quidway S2000 Series Command Manual

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches
Example
# Display all the host names and their IP addresses.
<Quidway> display ip host
Host
My
Aa
Table 2-2 Output description of display ip host command
Host
Age
Flags
Address(es)

2.1.4 display ip interface vlan-interface

Syntax
display ip interface vlan-interface vlan-id
View
Any view
Parameter
vlan-id: Specifies the management VLAN interface ID.
Description
Using display ip interface vlan-interface command, you can view the information
about the management VLAN interface.
Example
# Display the information about the management VLAN interface 1.
<Quidway> display ip interface vlan-interface 1
Vlan-interface1 current state : DOWN ,
Line protocol current state : DOWN
Internet Address is 1.1.1.1/8 Primary
Broadcast address : 1.255.255.255
The Maximum Transmit Unit : 1500 bytes
input packets : 0, bytes : 0, multicasts : 0
output packets : 0, bytes : 0, multicasts : 0
Age Flags
0 static
0 static
Field
2-3
Chapter 2 System IP Configuration Commands
Address(es)
1.1.1.1
2.2.2.4
Description
Host name
term of validity
Flags
IP address of the host