Display User-Interface - Huawei Quidway S2000 Series Command Manual

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches

1.1.6 display user-interface

Syntax
display user-interface [ type number ] [ number ]
View
Any view
Parameter
type: Specifies the type of a user interface.
number: Specifies the number of a user interface.
Description
Using display user-interface command, you can view the relational information of the
user interface.
absolute/relative index, transmission speed, priority, and authentication methods.
Example
# Display the relational information of user interface 0.
<Quidway> display user-interface 0
Idx Type
F 0 AUX 0
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
A: Authenticate use AAA.
L: Authenticate use local users table.
N: Current user-interface need not authentication.
P: Authenticate use current UI's password.
The displayed information
Tx/Rx Modem Privi Auth
9600 3
1-5
Chapter 1 Logging in Ethernet Switch Commands
includes
N
user interface type,