Cli Through A Telnet Session - Alcatel Speed Touch Pro User Manual

17 Speed Touch Pro Command Line Interface

17.1 CLI through a Telnet Session

Introduction
Note
In this section
Telnet features
Telnet requirements
308 / 340
Via a PC connected to the Ethernet interface of the
execute CLI commands.
However, you must gain access to the
TCP/IP Telnet session.
The examples throughout this section all refer to Microsoft
Windows OSs. However, all the concepts remain equally valid for
other OSs.
This section covers the following topics:
Telnet Features
"
Telnet Requirements
"
Opening a Telnet Session to your
"
Closing a Telnet Session.
"
Telnet is:
A fairly general, bi directional, eight bit byte oriented
"
communication facility
A standard method of interfacing terminal devices to each
"
other.
Prior to using Telnet, you need:
A connected, and configured
"
or DNS hostname
A PC/workstation connected to the LAN
"
Note: LAN is referred to as a network containing at least one
PC/workstation, and your
A TCP/IP suite installed on this PC/workstation
"
A Telnet session installed on this PC/workstation.
"
first, by opening a
, with known IP address,
.
3EC 17059 AAAA TCZZA Ed. 02
you can