Os6800-Xni-U2 10 Gigabit Uplink Module; Backup Power Supply - Alcatel OS6850-48L Getting Started Manual

OS6800-XNI-U2 10 Gigabit Uplink
Module
OmniSwitch 6800-48, 6800-U24, and 6800-48L switches
support a 10 Gigabit expansion module (OS6800-XNI-U2).
The slot for the expansion module is located at the rear panel
of the switch chassis. The 10 Gigabit Ethernet expansion
module supports up to two 10 Gbps Small Form Factor Plug-
gable (XFP) optical transceivers. XFPs are ordered separately
and are available for short-reach and long-reach applications.
See the OmniSwitch 6800 Series Hardware Users Guide for
more information.
Note. The OS6800-XNI-U2 10 Gigabit expansion module
cannot be hot swapped. Attempting to hot swap the expan-
sion module will result in a reboot of the switch and may
interrupt network data flow.
6 OmniSwitch 6800 Series

Backup Power Supply

OmniSwitch 6800 Series switches support optional backup
power supply components. Components include:
OS6800-BPS-SHLF backup power supply shelf
•
OS6800-BPS 225W backup power supply module
•
Backup power supply daughtercard
•
Backup power supply connector cable
•
When backup power supply components are installed, the
primary (factory-installed) power supply continues to take on
the full power load for switch operations. Meanwhile, the
backup power supply operates in active standby mode. If the
primary power supply fails unexpectedly, the backup power
supply automatically takes up the full power load without
disrupting the switch.
October 2006