Set Up A Password - Alcatel OmniSwitch/Router Getting Started Manual

a. Enter at the login prompt and press
admin
The following prompt displays:
.
<Enter>
password:
b. Enter at this prompt and press
switch
When you have successfully logged in, the
screen will display similar to the following.
**************************************************************************************
Alcatel Omni Switch/Router
Copyright (c), 1994 - 2002 Alcatel Internetworking, Inc. All rights reserved.
Omni Switch/Router is a trademark of Alcatel Internetworking, Incorporated,
registered in the United States Patent and Trademark Office.
Press ENTER to start
The Omni Switch/Router is factory-configured to boot
up in (Command Line Interface) mode. The
CLI
allows you to enter single-line commands through the
local console. (For more information on
Text-Based Configuration Reference Manual.)
To start the Command Line Interface, press
The following message and
displayed, to indicate that you are in
Entering Command Line Interface
->
10 Installing Your Switch
<Enter>
CLI
, see your
CLI
.
<Enter>
prompt ( ) will be
CLI
->
mode:
CLI
You can also configure your switch
through the User Interface (
enter the User Interface, type
prompt (
CLI
.
The
displayed, indicating that you are in
mode. From here, you can type
UI
and press
Menu. (For more information on using
the
UI
Router User Manual.)
To return to
type either
( ) and press
/=>

10. Set Up a Password

Before you configure the connections for your switch,
you should set up a password for the
account. The
to all switch management functions.
The factory default password for the
. Follow these steps to change the password for
switch
the account:
admin
a. Type
password admin <old_password >
<new_password>
<Enter>
default password (
example,
-> password admin switch lahaina
o Configuration Modes o
UI
) and press
<Enter>
->
prompt ( ) will be
UI /=>
to view the Main
<Enter>
, refer to your Omni Switch/
mode from
CLI
or at the
UI
cli exit
.
<Enter>
login account provides full access
admin
at the prompt and press
CLI
. For example, to change the factory
) to a new password (for
switch
), enter the following:
lahaina
). To
at the
ui
.
?
mode,
UI
prompt
login
admin
account is
admin