Table of Contents
Advertisement
4 — Configuring generic node parameters
Procedure 4-3 Configuring the NMTI session timeout
1
Select:
HOUSE — MORE — SESS_TIMEOUT
2
Enter the desired session timeout setting:
a
b
c
Changing the password
The default password for the Speed Touch 591s is set to <mainstreet>. Passwords
must contain between 8 and 12 alphanumeric characters with no spaces, and are not
case sensitive.
When the unit is first commissioned, all passwords should be changed to prevent
unauthorized use.
The screen does not display the password as it is entered. If you make a typing error,
press <Esc> and select CANCEL. The system returns to the HOUSE menu display.
Procedure 4-4 Changing the password
HOUSE — MORE — CHNG_PSSWD — <password>
where password contains 8 to 12 alphanumeric characters excluding space, tab, period,
question mark, and percent sign
4-4
To set the timeout to its default setting of 12 h, select:
DEFAULT
To set the timeout to a specific number of minutes, enter:
MINUTES — <minutes>
where minutes is a value between 0 and 59
To set the timeout to a specific number of hours, enter:
HOURS — <hours>
where hours is a value between 1 and 24
Speed Touch 591s Technical Practices
90-8785-01
February 2001
Advertisement
Table of Contents
