14
Introduction
This chapter describes commands related to the Domain Name Server (
remote network monitoring (
configure router port
The commands for these features are available from the Networking submenu, which is
described in Chapter 25, "IP Routing."
Configuring the DNS Resolver
The Names Submenu
The
command takes you to the Names submenu. The one command in this menu,
is used to view and to configure the Domain Name Server (
up to three Domain Name Servers. The switch searches all three servers until it resolves the
name to an
address or until it fails to find the name.
IP
To display the
A screen similar to the following displays:
To configure one or more Domain Name Servers, enter the following command:
If the resolver function has not been enabled, a screen similar to the following displays:
DNS Resolver and RMON
feature in the switch. This chapter also describes how to
RMON)
addresses with the
MAC
submenu, enter the following command:
) resolver and
DNS
command.
) resolver. You can configure
DNS
,
Page 14-1