Table of Contents
Advertisement
32.7 Configuring FTP
You can upload and download the NXC's firmware and configuration files using FTP. To use
this feature, your computer must have an FTP client.
32.7.1 FTP Commands
The following table describes the commands available for FTP. You must use the
command to enter the configuration mode before you can use these commands.
terminal
Table 105 Command Summary: FTP
COMMAND
[no] ip ftp server
[no] ip ftp server cert certificate_name
[no] ip ftp server port <1..65535>
[no] ip ftp server tls-required
ip ftp server rule {rule_number|append|insert
rule_number} access-group {ALL|address_object}
zone {ALL|zone_object} action {accept|deny}
ip ftp server rule move rule_number to
rule_number
no ip ftp server rule rule_number
show ip ftp server status
32.7.2 FTP Commands Examples
This command sets a service control rule that allowed the computers with the IP addresses
matching the specified address object to access the specified zone using FTP service.
Router# configure terminal
Router(config)# ip ftp server rule 4 access-group Sales zone LAN action
accept
NXC CLI Reference Guide
Chapter 32 System Remote Management
DESCRIPTION
Allows FTP access to the NXC. The
command disables FTP access to the NXC.
Sets a certificate to be used to identify the NXC.
The
command resets the certificate used by
no
the FTP server to the factory default.
Sets the FTP service port number. The
command resets the FTP service port number to
the factory default (21).
Allows FTP access over TLS. The
disables FTP access over TLS.
Sets a service control rule for FTP service.
address_object: The name of the IP address
(group) object. You may use 1-31 alphanumeric
characters, underscores(
_
), or dashes (-), but the
first character cannot be a number. This value is
case-sensitive.
zone_object: The name of the zone. Use up to
31 characters (a-zA-Z0-9_-). The name cannot
start with a number. This value is case-sensitive.
You can also use pre-defined zone names like
LAN and WLAN.
Changes the index number of a service control
rule.
Deletes a service control rule for FTP service.
Displays FTP settings.
configure
no
no
no
command
193
Advertisement
Table of Contents
