Add A New Group Screen; Figure 22 Add A New Group; Table 19 Add Group - ZyXEL Communications NSA-2400 User Manual

• nobody
• lp
• root
• tty
• utm

4.6.2 Add A New Group Screen

Figure 22 Add a New Group

The following table describes the labels in this screen.

Table 19 Add Group

LABEL
New Group Information
Group Name
Group Membership
Available Users
Group Membership
Add Selected User(s)
NSA-2400 User's Guide
DESCRIPTION
Type a group name from 1 to 16 single-byte ASCII characters. The first
character must be alphabetical [A-Z a-z] (case insensitive) and cannot be
a number. See Section 4.6.1 on page 60
names.
A group is a set of users that have common NSA access rights. A user
can belong to more than one group. Choose what users should be added
to or removed from this group. You can select multiple users by holding
the [Ctrl] key while you click.
These are the users that have been created on the NSA. Select the
user(s) that you want to join this group and then click the Add Selected
User(s) button. You need to click Apply for the changes to take effect.
These are the users that already belong to this group on the NSA. Select
the user(s) that you want to leave this group and then click the Remove
Selected User(s) button. You need to click Apply for the changes to take
effect.
Select the user(s) that you want to join this group from the Available
Users list and then click the Add Selected User(s) button. You need to
click Apply for the changes to take effect.
Chapter 4 Sharing Screens
for more information on group
61