Chapter 17 Static Route
Figure 183 ADVANCED > STATIC ROUTE > IP Static Route
The following table describes the labels in this screen.
Table 91 ADVANCED > STATIC ROUTE > IP Static Route
LABEL
#
Name
Active
Destination
Gateway
Modify
17.2.1 IP Static Route Edit
Select a static route index number and click Edit. The screen shown next appears. Use this
screen to configure the required information for a static route.
288
DESCRIPTION
This is the number of an individual static route.
This is the name that describes or identifies this route.
This field shows whether this static route is active (Yes) or not (No).
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the ZyWALL's interface. The gateway helps forward packets to
their destinations.
Click the edit icon to go to the screen where you can set up a static route on the
ZyWALL.
Click the delete icon to remove a static route from the ZyWALL. A window displays
asking you to confirm that you want to delete the route.
ZyWALL P1 User's Guide