Show Running-Config Rip - Dell S4810 Reference Manual

Example
Dell#show ip rip database
Total number of routes in RIP database: 1624
204.250.54.0/24
204.250.54.0/24
203.250.49.0/24
203.250.49.0/24
210.250.40.0/24
210.250.40.0/24
207.250.53.0/24
207.250.53.0/24
208.250.42.0/24
208.250.42.0/24

show running-config rip

Display the current RIP configuration.
S4810
Syntax
show running-config rip
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Version 7.6.1.0
Routing Information Protocol (RIP)
[50/1] via 192.14.1.3, 00:00:12, GigabitEthernet 9/15
auto-summary
[50/1] via 192.13.1.3, 00:00:12, GigabitEthernet 9/14
auto-summary
[50/2] via 1.1.18.2, 00:00:14, Vlan 18
[50/2] via 1.1.130.2, 00:00:12, Port-channel 30
auto-summary
[50/2] via 1.1.120.2, 00:00:55, Port-channel 20
[50/2] via 1.1.130.2, 00:00:12, Port-channel 30
[50/2] via 1.1.10.2, 00:00:18, Vlan 10
auto-summary
[50/2] via 1.1.120.2, 00:00:55, Port-channel 20
[50/2] via 1.1.130.2, 00:00:12, Port-channel 30
[50/2] via 1.1.10.2, 00:00:18, Vlan 10
auto-summary
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1411