Show Fips Status - Dell Z9500 Command Reference Manual

show fips status

Displays the status of the FIPS mode.
Z9500
Syntax
show fips status
Defaults None
Command EXEC
Modes
Example
Dell#show fips status
FIPS Mode: Enabled
Dell#
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.1(0.0)
8.3.19.0
8.3.12.0
show ip ssh
Display information about established SSH sessions
Z9500
Syntax
show ip ssh
Defaults none
Command EXEC
Modes
EXEC Privilege
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
758
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
FIPS Cryptography