Configuring File Attributes - Huawei Quidway S3100 Series Operation Manual

Operation Manual – File System Management
Quidway S3100 Series Ethernet Switches
File operations and file attribute operations are independent of each other. For example,
if you delete a file with the main attribute from the Flash, the main attribute is not
deleted. It becomes the attribute of a valid file that is later downloaded to the Flash and
has same name as the previously deleted one.
The file attributes are compatible with that of the previous versions. After the BootROM
of a switch is upgraded, the previous default app startup file will have the main attribute.

1.1.2 Configuring File Attributes

You can configure and view the main attribute and backup attribute of the files used for
the next startup of a switch, and switch the main and backup attribute of the files.
Perform the following configuration in user view.
Table 1-2 Configure file attributes
Operation
Configure the app
file with the main
attribute
next startup
Configure the app
file with the backup
attribute
next startup
Configure
attribute (main or
backup)
Web file for the
next startup
Configure
name and attribute
(main or backup) of
the configuration
file for the next
startup
Configure
system
without loading the
configuration file
Switch
attributes between
main and backup
for files that are of
specific attribute
Command
boot boot-loader file-url
for the
boot
for the backup-attribute file-url
the
boot web-package webfile
of the
{ backup | main}
the
startup
saved-configuration cfgfile
[ backup | main ]
the
undo
to start
saved-configuration [ unit
unit-id ]
the file
boot attribute-switch { all |
app | configuration | web }
Huawei Technologies Proprietary
Chapter 1 File System Management
Optional
boot-loader
Optional
Optional
Optional
By default, a configuration file
is of the main attribute.
startup
Optional
Optional
1-2
Description