1-Port 100Base-T Poe Interface Module (S2016-Ei); Module Panel And Leds - Huawei Quidway S2000-EI Series Installation Manual

Installation Manual
Quidway S2000-EI Series Ethernet Switches
Attribute
Max. transmission
segment length
over the selected
cable
Central wavelength
Transmitting optical
power
Receiving
sensitivity
Caution:
When connecting the optical fiber,
Do not bend the optical fiber overly.
Correctly connect the Tx and Rx ends of ports.
Keep optical fiber connectors clean.

7.2 1-Port 100Base-T PoE Interface Module (S2016-EI)

1-port 100Base-T PoE (Power over Ethernet) interface module provides S2016-EI
one 100Base-T electrical port for the connection to a remote power supply system.

7.2.1 Module Panel and LEDs

Following is the panel of the 1-port 100Base-T PoE interface module for S2016-EI:
1-port 100Base-FX
1-port 100Base-FX
single-mode
module
15 km (49212 ft)
40 km (131233 ft)
over 9/125 µm
over 9/125µm
single-mode optical
single-mode optical
fiber
fiber
1310 nm
-14 dBm to -8 dBm -5 dBm to 0 dBm
-34 dBm
7-3
Chapter 7 Optional Interface Modules
Description
single-mode 1-port 100Base-FX
medium-haul multi-mode module
module
2 km (6561 ft) over
62.5/125µm multi-mode
optical fiber
-14dBm to -21 dBm
-31 dBm