Optional) Setting The Igmp Version - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Multicast
The system view is displayed.
Step 2 Run:
igmp-snooping enable
IGMP snooping is enabled globally.
Step 3 Run:
vlan vlan-id
The VLAN view is displayed.
Step 4 Run:
igmp-snooping enable
IGMP snooping is enabled in the VLAN.
----End

1.3.3 (Optional) Setting the IGMP Version

Context
According to the version of IGMP applied on a network, you can set the version of IGMP
messages that the S2700 with the IGMP snooping function can process.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN view is displayed.
Step 3 Run:
igmp-snooping version { 1 | 2 |3 }
The version of IGMP messages that the S2700 can process is set.
By default, the S2700 can process messages of IGMPv1 and IGMPv2 but cannot process
messages of IGMPv3.
----End
Issue 01 (2011-07-15)
NOTE
To enable the IGMP Snooping function of multi-VLANs, run the igmp-snooping enable [ vlan vlan-id1
[ to vlan-id2 ] & <1-10> ] command in the system-view.
If IGMP snooping is enabled in a VLAN, global VLAN mapping cannot be configured.
NOTE
When the forwarding in a VLAN is based on the MAC address, the IGMP message version cannot be set
to IGMPv3.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 IGMP Snooping Configuration
5