Optional) Displaying The Sftp Client Command Help - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
system-view
The system view is displayed.
Step 2 According to the address type of the SSH server, select and perform one of the two configurations
below.
l For IPv4 addresses,
l For IPv6 addresses,
Step 3 Run the command.
l Run:
l Run:
l Run:
l Run:
----End

9.6.7 (Optional) Displaying the SFTP Client Command Help

You can view the SFTP client command help.
Context
Do as follows on the login switch:
Procedure
Step 1 Run:
system-view
Issue 01 (2011-07-15)
Run:
sftp [ -a source-address ] host-ipv4 [ port ] [ [ prefer_kex { dh_group1 |
dh_exchange_group } ] | [ prefer_ctos_cipher { des | 3des | aes128 } ] |
[ prefer_stoc_cipher { des | 3des | aes128 } ] | [ prefer_ctos_hmac { sha1 |
sha1_96 | md5 | md5_96 } ] | [ prefer_stoc_hmac { sha1 | sha1_96 | md5 |
*
md5_96 } ] ] [ -ki aliveinterval [ -kc alivecountmax ] ]
You can log in to the SSH server through SFTP.
Run:
sftp ipv6 [ -a source-address ] host-ipv6 [ -i interface-type
number ] [ port ] [ [ prefer_kex { dh_group1 | dh_exchange_group } ] |
[ prefer_ctos_cipher { des | 3des | aes128 } ] | [ prefer_stoc_cipher { des |
3des | aes128 } ] | [ prefer_ctos_hmac { sha1 | sha1_96 | md5 | md5_96 } ] |
[ prefer_stoc_hmac { sha1 | sha1_96 | md5 | md5_96 } ] ]
[ -kc alivecountmax ] ]
rename old-name new-name
The name of the specified file on the server is changed.
get remote-filename [local-filename]
The file on the remote server is downloaded.
put local-filename [remote-filename]
The local file is uploaded to the remote server.
remove remote-filename
The file on the server is removed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Telnet and SSH
interface-
*
[ -ki aliveinterval
144