TRANSMISSION, GEARBOX, AND FINAL DRIVE OIL CHANGE
To Change Final Drive
1 Remove drain plug 2. Allow adequate time for
old oil to drain.
2. Reinsert plug into hole 2.
3. Refill reservoir through fill plug hole 3 until oil
just starts to run out.
4. Reinsert plug into hole 3.
2. Final Drive
Drain Plug
3. Final Drive
Fill Plug
CAUTION
When replacing a system component only, such as the differential,
radiator, oil line or pump filter, the
system must be reprimed with oil.
Refer to Section F - "Automatic
Transaxle" or Section
G -
"Manual
Transmission" for the correct
procedure.
To Change Gearbox Oil (S-Speed)
1. Remove drain plug 5. Allow adequate time for
old oil to drain.
2. Replace oil drain plug washer with new one.
3. Reinsert drain plug into drain.
4. Refill reservoir through fill plug hole 4 until oil
just starts to run out.
s.-Reinsert plug into hole 4.
A2-3
4. 'Gearbox
Fill Plug
5. Gearbox
Drain Plug