3. Turn clockwise if the speed decreased, or
counterclockwise if the speed increased.
Make these adjustments in small steps.
C.
Sensitivity Adjustment
The "SENSITIVITYADJ." is set at the factory.
No further adjustment is required. It should
be set to full clockwise position.
D.
Final Test
After adjustments have been made, use all
the features of the system - Set Speed, Coast,
Resume, Accelerate - and move slide button
to "OFF". If everything checks satisfactorily,
you are done with the road test. If
it
does
not, see the Trouble Shooting Guide.
01-8
1
\
I
.1
i
j