Le Sharo, Utility Van, And Phasar By Winnebago Industries - Winnebago 1987-1989 LeSharo Service Manual

·
.....
,
LE SHARO, UTILITY VAN, AND PHASAR BY WINNEBAGO INDUSTRIES
SERVICE MANUAL
This service manual describes and illustrates procedures for the removal, repair, and reinstallation of
individual components and assemblies of the Winnebago LeSharo, Utility Van, and Itasca Phasar vehicles,
also known cumulatively -as the "H" body.
Keep this manual available for ready reference. It will aid the technician in providing quality service and
repairs to the owners of the LeSharo, Utility Van, and Phasar vehicles.
The repair methods described in this manual are based upon the most recent information available at the
time of publication. Winnebago Industries, Inc., reservesthe right to make any changes without prior notice.
Winnebago Industries, Inc., reserves the right to make changes in design and to make additions to or
improvement in its products without imposing any obligation upon itself to make such changes,
improvements, or additions to products previously manufactured.
CAUTION
To properly reduce the chance of personnel injury and/or property damage, the following instructions
must be carefully observed.
Proper service and repair are important to the safety of the service technician and the safe, reliable
operation of all motor vehicles. If part replacement is necessary,the part must be replaced with one of the
same part number or with an equivalent part. Do not use a replacement part of lesser quality.
The service procedures recommended and described in this manual are effective methods of performing
service and repair. Some of these procedures require the use of tools specially designed for the purpose.
Accordingly, anyone who intends to use a replacement part, service procedure or tool, which is not
recommended by the vehicle manufacturer, must first determine that neither his safety nor the safe
operation of the vehicle will be jeopardized by the replacement part, service procedure, or tool selected.
It is important to note that this manual contains various "Cautions" and "Warnings" that must be carefully
observed in order to reduce the risk of personal injury during service or repair, or the possibility that
improper service or repair may damage the vehicle or render it unsafe. It is also important to understand
that these "Cautions" and "Warnings" are not exhaustive, because it is impossible to warn of all the
possible hazardous consequences that might result from failure to follow these instructions.
These vehicles contain some parts dimensioned in the metric system as well as in the domestic system. Some
fasteners are metric and are very close in dimension to familiar customary fasteners in the inch system. It is
important to note that, during any vehicle maintenance procedures, replacement fasteners must have the
same measurements and strength as those removed, whether metric or domestic. (Numbers on the heads of
metric bolts and on surfaces of metric nuts indicate their strength. Domestic bolts use radial lines for this
purpose, while most domestic nuts do not have strength markings.) Mismatched or incorrect fasteners can
result in vehicle damage or malfunction, or possibly personal injury. Therefore, fasteners removed from the
vehicle should be saved for reuse in the same location unless otherwise indicated. Where the fasteners are
not satisfactory for reuse, care should be take to select a replacement that matches the original.
Winnebago Industries, Inc.
Forest City, Iowa 50436