FRONT AXLE ALIGNMENT
STEERING BOX HEIGHT SETTING
ADJUSTING
Always begin the operation with the side which is
the furthest from the correct zone.
• Loosen the four steering box mounting bolts and
move the box by hand to:
- bring the beam tips onto the correct zones on
the
T.Av.
552 scaleboards
(method
with
compression).
- carry out the corrections
given in the table
(method without
compression).
• Retighten the four bolts gradually and check the
setting.
• Check the toe and adjust if necessary.
List of apparatus currently available in the U.S.giving
a direct parallelism reading wheel by wheel:
Manufacturer
Lowener
John Bean
Hunter
Muller
Type
Uniflex
Optoe Liner
Autron-a- Line
666
J2-9
!
...
J