REBUILD
FINAL ASSEMBLY
Pin the 3rd/4th lever (14) to its shaft, holding it in
place with a pair of long bent-nosed pliers, with the
3rd/4th shaft in 4th.
• Fit the spring washers to the primary and
secondary shafts ensuring that they face the
correct direction.
• Attach the circlip using tool B.Vi. 902-01.
Primary shaft:
• Use the (10 x 150) threaded rod.
Secondary shaft:
• Use the (12 x 150) threaded rod.
• Screw the rod (A) into the shaft (primary or
secondary).
Attach the body of the tool C and screw on the nut
(F) while holding tool (C)to prevent it from turning.
After removing the tool, ensurethat the circlips have
correctly entered their locations.
G3-42
F
A orB
B.Vi.902·0'
c
.'"\
I
I
. 1
I
1
.l
_'
.. 1