Reassembling The Final Drive Pinion - Winnebago 1987-1989 LeSharo Service Manual

FINAL DRIVE REBUILD
REASSEMBLY
• Install the bearing (4) on the press with the
reference mark (A) toward the final drive pinion.
• Apply 3 drops of "Loctite®" to the threads in the
nut.
• Hold the pinion vertically in a visewith soft jaws.
Runup the nut (5) and tighten it to a torque of 4
daNm (30 Ib.lft.) using tool B.Vi. 903.
• Turn the bearing by hand then tighten the nut to
a torque of 22 daNm (160 Ib.lft.)
REASSEMBLING THE FINAL DRIVE PINION:
• Install the pinion assembly into the center case.
Install the shimfirst if the gasket/shimset is being
used between the case housings. (Refer to
"Differential/lntermediate Case Gasket", pages
F7-2and F7-3.)
• Mount the gear (7) with its offset toward the
cylindrical roller bearing.
• Install the final drive pinion (3) on the press.
F7-14
11
\
j
J
.,j
U
1
I