Winnebago 1987-1989 LeSharo Service Manual page 317

COMPONENTS
HYDRAULIC CONTROL UNIT (VALVE BODY)
The hydraulic control unit delivers (or discharges) oil
to (or from) the clutches and brakes in accordance
with the solenoid pilot valve feed.
TIGHTENING TORQUES
Distributor bolts 0.9 daNm (6.5 Ib.lft.)
Pan bolts 0.6 daNm (4.5 Ib.lft.)
Cover plate bolts 1.3 daNm (9.5 Ib.lft.)
; i
. i
L(
REMOVAL
• Drain the fluid and remove:
- the pan
- the filter screen (resuse seal
J)
- all the control unit bolts except for bolt A.
• When removing bolt (A) take care that the
following do not fall:
- manually operated valve (14)
- the plate and two seals located under the
control unit.
• Remove clip (E) from the sealed connector and
remove the control unit/solenoid pilot valve
assembly.
CHECKING
Check that the sequence valves (6) and (7) slide
freely at (A) using a small screwdriver and also make
sure that the other valves slide freely. TAKE CARE
NOT TO DAMAGE THE PARTS.
F3-8