HEATER VALVE
CHANGING
REMOVING
• Clamp hoses (1) and (2) using clamp Mot. 453-01.
1
• Disconnect hoses (1) and (2)
• Remove cable clip (3)
• Disconnect cable (5) at the heater valve end
• Remove fresh air door rod (4)
• Remove the screws holding the heater valve
• Remove the valve
REASSEMBLY
• Lift up the new heater valve
• Attach the heater valve cable
• Attach the fresh air door rod
• Attach hoses (1) and (2)
• Bleed the cooling system after the operation is
complete
CAUTION
Serious internal engine damage could result due to
low coolant level if the cooling system is not bled
after this operation.
M7-1