Install Or Connect; Tighten - Winnebago 1987-1989 LeSharo Service Manual

ENGINE OVERHAUL AND REBUILD
ROCKER SHAFT
INSTALL OR CONNECT
• Reassemble rocker shaft assembly in the reverse
order of disassembly. Lubricate with engine oil
during assembly.
NOTE: Shaft bearings number one, two, three and
four (B) are identical. Shaft bearing number
five has two threaded holes (C) for retaining
the camshaft thrust plate and a hole for the
retaining pin (7).
The intake and exhaust valve rocker arms are
identical.
The oil hole (D) in each rocker arm is for camshaft
lubrication.
Tighten
Torque tighten the plug to 2 daNm (15 Ib.lft.) This
torque setting must not be exceeded or damage will
result to the roll pin in bearing 5.
B3-14
Bearings 1 - 4
I
i
l
{"
i
I
['
r
I
L
,
l
L
[
I
l