REBUILD
FINAL DRIVE ASSEMBLY
1
,
1
• Fit the bearing (4) on the presswith the reference
mark (A) towards the final drive pinion.
• Apply 3 drops of Loctite® threadlocker to the
threads in the nut.
• Hold the pinion vertically, spin the nut up (5) and
tighten it to a torque of 4 daNm (30 Ib.lft.) using
tool a.Vi. 903.
• Turn the bearing by hand then tighten the nut to
a torque of 22 daNm (162 Ib.lft.)
REFiniNG THE FINAL DRIVE PINION:
• Install the gear (7) with its offset towards the
cylindrical roller bearing.
• Fit the final drive pinion (3) on the press.
G3-17
\
7