Table of Contents
Advertisement
FRONT BRAKE CALIPERS
REMOVE
AND REPLACE
I
1
REASSEMBLY
• Mount the brake pads
• Slip one end of the caliper between the spring clip
and the key locating face on the bracket.
• The first
key should
slide in easily;
use a
screwdriver to insert the second key by prying
between the caliper and bracket.
• Remove the screwdriver and tap the second key
fully home with a pin punch.
• Mount new key retaining clips.
• Bleed the clutch hydraulic circuit (if applicable)
followed by the brake circuit.
• Press the brake pedal several times to push the
pistons up into contact with the pad.
16-2
Advertisement
Table of Contents
Troubleshooting
