Winnebago 1987-1989 LeSharo Service Manual page 95

ENGINE OVERHAUL & REBUILD
CYLINDER HEAD INSTALLATION
INSTALL OR CONNECT
• Install the camshaft thrust plate (C)
• Install the replacement camshaft oil seal with Oil
Seal Installation Tool, Mot. 791-01.
• Measure the camshaft end play. Refer to the
Specifications chart on B1-13.
• Install the camshaft sprocket and retaining bolt on
the end of the camshaft.
• Use Sprocket Holding Tool Mot. 855 and tighten
the camshaft bolt to 5.8 daNm (37 Ib.lft.)
B3-44
r
I
(
(
r
r
lr
: :
~j
n
(
l...
!.