COMPLETE
REPLACEMENT
FRONT PILLAR TOP SECTION
PREPARATION
After grinding the joints smooth, apply a coat of
plastic filler or zinc-basedpaint to the new panel to
prevent rust forming.
REFiniNG
Mount the new section and align it with the door
and wing.
5potweld the following joints:
-H : "A" pillar
-F and G : pillar lining
Chain weld the following:
-E : front pillar bottom section
-I : pillar lining stiffener
Braze seam weld:
-0 : Body top.
Oxy-acetylenebutt-weld:
-H : w/s to Hood cowl
Apply strips of C54 sealer to the following joints:
G: pillar lining.
E: front pillar bottom section
I: fender lining stiffener
0: body top
P1-39