Tension Adjustment - Winnebago 1987-1989 LeSharo Service Manual

TIMING BELT INSTALLATION
I
\.:.
, ",
!
• Position the timing belt cover over the sprockets
and check the camshaft timing mark with the
index on the cover.
TENSION ADJUSTMENT
• Remove TDe Rod and install the plug in the
cylinder block.
• Rotate the crankshaft clockwise (normal direction)
two complete revolutions.
CAUTION
Never rotate the crankshaft counterclockwise when
adjusting the timing belt tension.
• Remove the timing belt cover and loosen the
timing belt tensioner bolts (1) 1/4 turn.
• The spring loaded timing belt tensioner (2), in
contact with the belt, will automatically adjust to
the correct position.
• Ensurethat the clearance between the timing belt
tensioner and the intermediate shaft cover is
correct.
84·3